PULS ELECTRONIC is producing load cells for use of weight measuring systems, digital indicators, assembly accessories, thermocouples and sensor in various kinds. Also manufacturing anti-static products (Anti-static bar, ionizing air blower, anti static air gun, Static Nozzles, PULS DC) static-charging products and static measuring devices. Our company follows the machine sector closely and determines the needs of the manufacturers more correctly, then aims to find the most suitable solution.
DIGITAL INDICATOR FABRICATION
Three different digital indicator and control unit are produced to be used for packaging and dosing foundations. Our company based on the flexibility and modularity in our designs manufactures these products according to the needs of the machine manufacturers:
FSM-2 Weight Indicator:
It is a high soluble weight indicator that is generally designed for the ground weighbridge. Because of its spesifications of fixable printers and eight load cells of 350 ohm, it has a wide range application area from the high capability weighbridge to the vehicle weigher.
HGX-1000 Digital Indicator and Control Unit
HGX-1000 giving a solution for control and remoting systems for simple packaging machines, has 2 NO inputs and 3 relay outputs. It is worked with HGXd and HGXp which are buried software specified fort he application of packaging and dosing. An input/output module can be added for small foundation and machines of dozajlama.
It is possible to communicate with a different device, PC and PLC by using standart RS-232 communication port.
HGX-2000 Digital Indictor and Control Unit
HGX-2000 having a structure of a modul is developed for using in the complete automation of complex dosing foundation. It has a flexible area with the added extra moduls prepared for different necessities. These moduls can be analog input/output, digital input/output, binary and BCD output moduls. Software services are given with the standart buried software of the device for special applications.
It is produced of 2, 5, 10 tons for the aim of weighing done during the carrying equipments by a crane. PHANTOM worked with its accumulator shuts down automatically when it is not used. Besides, various special applications are applied for cranes.
At any issue ,in weight evaluation systems which is our expertise subject,engineering and consulting services are supplied if requested.In addition, specific automation solutions can be counted within our engineering services.
(LOAD CELL) PRODUCTION:
For different mounting types and applications, production of more than 30 load cell models in 7 categories is provided . Mounting equipments are designed to obtain maximum performance from product and minimalize field problems that can occur while mounting .Some mounting equipments are produced for preventing problems which can occur during transportation of machines.Our standard loadcell is like that:
1-) Single Point Load Cell Model PS: 6 - 40 kgf
2-) Single Point Load Cell Model PL: 10 - 100 kgf
3-) Single Point Load Cell Model RT: 100 - 600 kgf
4-) Bending Beam Load Cell Model BT: 20 - 200 kgf
5-) Shear Beam Loadcell Model LT: 100 - 2.000 kgf
6-) Column Type Load Cell Model CT: 10-30 ton
7-) Stretch Control Type Load Cell RS: 50-100 kgf
8-) S Type Loadcell Model ST: 100 - 5.000 kgf
9-) S Type Loadcell Model ST-2W: 10 - 20 Tf
10-) High Capacity Loadcell Model HT: 2.000 - 50.000 kgf
Various mounting equipments are produced for these models.
ANTI STATIC BAR
High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It is designed to neutralize degenerating static charges. It provides high performance and efficient ionization with fast decharge time.
With Respect to Usage Areas;
1-)Air Blower Connected (Air Feeded) Anti Static Bar
2-)Compressor Connected Anti Static Bar
IONIZED AIR BLOWER
H&O Air Blower, is designed to neutralize the static charges which causes problems in long distances and broad width. High technology used in design can produce more efficient results for static electric problems even in high-speed applications.It provides high performance and efficient ionization with fast decharge time. Air Blower,seperates air molecules to positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks,explosions,fire danger and pulling of dust of which is caused by static electric will be prevented.
With Respect to Usage Areas;
1-)Single Fanned Anti Static Preventer
2-)Dual Fanned Anti Static Preventer
ANTI STATIC IONIZATION GUN
H&O Ionization Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from surfaces in industrial applications. .It provides high performance and efficient ionization with fast decharge time. Ionization gun,seperates air molecules to positive and negative ions by the electric field it generates and transports them .
STATIC CONTROL NOZZLES
Static Control Nozzles,are designed to neutralize the high static charges for industrial applications in which anti static bars can not be mounted. It provides high performance and efficient ionization with fast decharge time. Statik Control Nozzles,seperates air molecules to positive and negative ions by the electric field it generates and transports them with its air nozzles.Any static charged product passed from the efficient distance of the nozzle will draw the opposite charged ions and neutralize the product. At the same time electrical shocks,explosions,fire danger and pulling of dust of which is caused by static electric will be prevented.
With Respect to Usage Areas;
1-)NZK25 Anti Static Nozzles
2-)NZK30 Anti Static Nozzles
STATIC LOADER BAR
H&O charger bars are used in applications in which the materials should be sticked to a place or each other.Many production steps requires sticking of components or materials to each other.This sticking shouldn't leave marks and damage product surface when the materials are seperated.High resistant materials such as paper and plastic can be bonded to conductive surfaces without using glue.Electrostatic loading which is provided by ionization,
is a charger system consists of a charge generator and a charge applier .
Analysis of static problems are very hard without evaluation of static charge.A decent static meter supplies the possibility of analysis of the problem to the technician.Static meter displays where and how the static current is generated and its polarization and amplitude.
If a static charge preventer is needed in the proble static meter determines the best position for static charge preventer and displays its performance.static meter generates standard for technician for avoiding future problems.These standards varies from the current level of regions which are ordered from,produced or sent to user.